Ip Dvmrp Trapflags; Show Ip Dvmrp - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a metric of 5 for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip dvmrp metric 5

ip dvmrp trapflags

Use the ip dvmrp trapflags command in Global Configuration mode to enable the DVMRP trap
mode.
Syntax
ip dvmrp trapflags
no ip dvmrp trapflags
Default Configuration
Disabled is the default state.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following command enables DVMRP trap mode.
console#configure
console(config)#ip dvmrp trapflags
console(config)#no ip dvmrp trapflags

show ip dvmrp

Use the show ip dvmrp command in Privileged EXEC mode to display the system-wide
information for DVMRP .
587