Ip Igmp Last-Member-Query-Interval - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example sets 10 as the number of VLAN 2 Group-Specific Queries.
console#configure
console(config)#interface vlan 2
console(config-if-vlan2)#ip igmp last-member-query-count 10
console(config-if-vlan2)#no ip igmp last-member-query-count

ip igmp last-member-query-interval

Use the ip igmp last-member-query-interval command in Interface Configuration mode to
configure the Maximum Response Time inserted in Group-Specific Queries which are sent in
response to Leave Group messages.
Syntax
tenthsofseconds
ip igmp last-member-query-interval
no ip igmp last-member-query-interval
tenthsofseconds — Maximum Response Time in tenths of a second (Range: 0-255)
•
Default Configuration
The default Maximum Response Time value is ten (in tenths of a second).
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures 2 seconds as the Maximum Response Time inserted in VLAN
15's Group-Specific Queries.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp last-member-query-interval 20
595