Max req
Login Time
Last Authentication
Mac address
Authentication Method
Termination Cause
show dot1x users
The show dot1x users Privileged EXEC mode command displays 802.1X users for the switch.
Syntax
show dot1x users [username username]
username—Supplicant username (Range: 1- 160 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
•
There are no user guidelines for this command.
Example
The following example displays 802.1X users.
console# show dot1x users
Username
Session
Time
--------
-----------
Bob
1d3h
John
8h19m
The following table describes the significant fields shown in the display:
The maximum number of times that the switch sends an Extensible
Authentication Protocol (EAP)-request/identity frame (assuming that no
response is received) to the client before restarting the authentication
process.
How long the user is logged in.
Time since last authentication.
The supplicant MAC address.
The authentication method used to establish the session.
The reason for the session termination.
Last Auth
Auth
Method
---------
-------- --------------
58m
Remote
2m
None
MAC Address
00:08:3b:79:87:87 g1
00:08:3b:89:31:27 g2
Interface
--------
381
802.1x Commands