Dell PowerConnect M6348 Cli Reference Manual page 635

User Guidelines
This command has no user guidelines.
Example
The following example displays the routing table.
console#show ip route
Route Codes: R - RIP Derived, O - OSPF Derived, C - Connected, S - Static
B - BGP Derived, IA - OSPF Inter Area
E1 - OSPF External Type 1, E2 - OSPF External Type 2
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA external type 2
show ip route preferences
Use the show ip route preferences command in Privileged EXEC mode displays detailed
information about the route preferences. Route preferences are used in determining the best
route. Lower router preference values are preferred over higher router preference values.
Syntax
show ip route preferences
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays IP route preferences.
console#show ip route preferences
Local.......................................... 0
Static......................................... 1
OSPF Intra-area routes......................... 110
635