Layer 3 Commands - Dell PowerConnect M6348 Cli Reference Manual

Table 1-1. System Command Groups
Command Group
DHCP Snooping
Dynamic ARP Inspection
Ethernet Configuration
GVRP
IGMP Snooping
IGMP Snooping Querier
IP Addressing
IPv6 ACL
IPv6 MLD Snooping
IPv6 MLD Snooping Querier
LACP
Link Dependency
LLDP
Port Aggregator Commands
Port Monitor
QoS
Radius
Spanning Tree
TACACS+
VLAN
Voice VLAN
802.1X

Layer 3 Commands

ARP (IPv4)
DHCP and BOOTP Relay
(IPv4)
46
(continued)
Description
Configures DHCP snooping and whether an interface is trusted for
filtering.
Configures for rejection of invalid and malicious ARP packets.
Configures all port configuration options for example ports, storm
control, port speed and auto-negotiation.
Configures and displays GVRP configuration and information.
Configures IGMP snooping and displays IGMP configuration and IGMP
information.
Configures IGMP Snooping Querier and displays IGMP Snooping
Querier information.
Configures and manages IP addresses on the switch.
Configures and displays ACL information for IPv6.
Configures IPv6 MLD Snooping.
Configures IPv6 Snooping Querier and displays IPv6 Snooping Querier
information.
Configures and displays LACP information.
Configures and displays link dependency information.
Configures and displays LLDP information.
Provides server administrators the ability to map internal ports to
external ports easily.
Monitors activity on specific target ports.
Configures and displays QoS information.
Configures and displays RADIUS information.
Configures and reports on Spanning Tree protocol.
Configures and displays TACACS+ information.
Configures VLANs and displays VLAN information.
Configures voice VLANs and displays voice VLAN information
Configures and displays commands related to 802.1X security protocol.
Manages Address Resolution Protocol functions.
Manages DHCP/BOOTP operations on the system.