Dot1X Re-Authenticate; Dot1X Timeout Quiet-Period - Dell PowerConnect 3424 Cli Reference Manual

Examples
The following example sets the number of seconds between re-authentication attempts, to 300.
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x timeout re-authperiod 300

dot1x re-authenticate

The dot1x re-authenticate Privileged EXEC mode command manually initiates a re-
authentication of all 802.1X-enabled ports or the specified 802.1X-enabled port.
Syntax
dot1x re-authenticate [ethernet interface]
• interface — Valid Ethernet port. (Full syntax: unit/port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following command manually initiates a re-authentication of 802.1X-enabled Ethernet port
1/e16.
Console# dot1x re-authenticate ethernet 1/e16

dot1x timeout quiet-period

The dot1x timeout quiet-period Interface Configuration mode command sets the number of
seconds that the device remains in the quiet state following a failed authentication exchange
(for example, the client provided an invalid password). To return to the default configuration,
use the no form of this command.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
441
802.1x Commands