Command
switchport voice detect auto
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
CDP Interoperability
Command
clear isdp counters
clear isdp table
isdp advertise-v2
isdp enable
isdp holdtime
isdp timer
show isdp
show isdp interface
show isdp entry
show isdp neighbors
show isdp traffic
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
DHCP l2 Relay
Command
dhcp l2relay
dhcp l2relay circuit-id
dhcp l2relay remote-id
dhcp l2relay vlan
dhcp l2relay trust
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Description
Enables the VoIP Profile on all the interfaces of the switch. GC/IC
Description
Clears the ISDP counters.
Clears entries in the ISDP table.
Enables the sending of ISDP version 2 packets from the
device.
Enables ISDP on the switch.
Configures the hold time for ISDP packets that the switch
transmits.
Sets period of time between sending new ISDP packets.
Displays global ISDP settings.
Displays ISDP settings for the specified interface.
Displays ISDP entries.
Displays the list of neighboring devices.
Displays ISDP statistics.
Description
Enables the Layer 2 DHCP Relay agent for an interface.
Enables user to set the DHCP Option 82 Circuit ID for a
VLAN.
Enables user to set the DHCP Option 82 Remote ID for a
VLAN.
Enables the L2 DHCP Relay agent for a set of VLANs.
Configures an interface to trust a received DHCP
Option 82.
Mode*
Mode*
PE
PE
GC
GC/IC
GC
GC
PE
PE
PE
PE
PE
Mode*
GC/IC
GC
GC
GC
IC
53