Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\802.1X.fm
Parameters
seconds—Number of seconds between re-authentication attempts. (Range:
30–4294967295)
Default
3600
Command Mode
Interface Configuration (Ethernet) mode
Example
console(config)# interface gigabitethernet 1/0/1
console(config-if)# dot1x timeout reauth-period 5000
dot1x re-authenticate
The dot1x re-authenticate Privileged EXEC mode command manually
initiates re-authentication of all 802.1x-enabled ports or the specified 802.1x-
enabled port.
Syntax
[interface-id]
dot1x re-authenticate
Parameters
interface-id—Specifies an interface ID. The interface ID must be an
Ethernet port.
Command Mode
Privileged EXEC mode
Example
The following command manually initiates re-authentication of 802.1x-
enabled gigabitethernet port 1/0/15.
Console#
gigabitethernet 1/0/15
dot1x re-authenticate
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
299
802.1x Commands
Advertisement
Table of Contents
