Voice Vlan Data Priority - Dell Networking 2024 Reference Manual

auth—Enables/disables authentication on the voice vlan port.
•
data—Observe the priority on received voice vlan traffic (trusted mode).
•
• dot1p—Configure Voice VLAN 802.1p priority tagging for voice traffic.
• dscp—Configure DSCP value for voice traffic on the voice vlan port.
(Range: 0–64).
• none—Allow the IP phone to use its own configuration to send untagged
voice traffic
• priority—The Dot1p priority for the voice VLAN on the port.
• trust—Trust the dot1p priority or DSCP values contained in packets
arriving on the voice vlan port.
untagged—Configure the phone to send untagged voice traffic.
•
untrust—Do not trust the dot1p priority or DSCP values contained in
•
packets arriving on the voice vlan port.
vlanid —The voice VLAN ID.
•
Default Configuration
The default DSCP value is 46.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-Gi1/0/1)#voice vlan 1
console(config-if-Gi1/0/1)#voice vlan dot1p 1
console(config-if-Gi1/0/1)#voice vlan none
console(config-if-Gi1/0/1)#voice vlan untagged

voice vlan data priority

This command is to either trust or not trust (untrust) the data traffic arriving
on the voice VLAN port.
Voice VLAN Commands
837