Merging A Full Example - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

Using the Indexes
This reference contains two indexes: a complete index that includes topic entries,
and an index of statements and commands only.
In the index of statements and commands, an entry refers to a statement summary
section only. In the complete index, the entry for a configuration statement or
command contains at least two parts:
Using the Examples in This Manual
If you want to use the examples in this manual, you can use the
load merge relative
incoming configuration into the current candidate configuration. If the example
configuration contains the top level of the hierarchy (or multiple hierarchies), the
example is a full example. In this case, use the
If the example configuration does not start at the top level of the hierarchy, the
example is a snippet. In this case, use the
procedures are described in the following sections.

Merging a Full Example

To merge a full example, follow these steps:
1.
MX Series
T Series
The primary entry refers to the statement summary section.
The secondary entry, usage guidelines, refers to the section in a configuration
guidelines chapter that describes how to use the statement or command.
command. These commands cause the software to merge the
From the HTML or PDF version of the manual, copy a configuration example
into a text file, save the file with a name, and copy the file to a directory on your
routing platform.
For example, copy the following configuration to a file and name the file
. Copy the
ex-script.conf ex-script.conf
platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
load merge
command.
load merge
load merge relative command. These
file to the directory on your routing
/var/tmp
Using the Indexes
About This Guide
or the
lxv