Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 75

NOTE: The accounting-profile statement is an exception to this rule. The
accounting-profile statement can be configured at the
hierarchy level, but it cannot be configured at the
unit logical-unit-number]
logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
hierarchy level.
interfaces {
traceoptions {
file filename <files number> <match regular-expression> <size size>
<world-readable | no-world-readable> ;
flag flag <disable>;
}
interface-name {
accounting-profile name;
aggregated-ether-options {
(flow-control | no-flow-control);
lacp {
(active | passive);
link-protection{
disable;
(revertive | non-revertive);
periodic interval;
system-priority priority;
}
link-protection;
link-speed speed;
(loopback | no-loopback);
mc-ae{
chassis-id chassis-id;
mc-ae-id mc-ae-id;
mode (active-active | active-standby);
redundancy-group group-id;
status-control (active | standby);
}
minimum-links number;
source-address-filter {
mac-address;
}
(source-filtering | no-source-filtering);
}
aggregated-sonet-options {
link-speed speed | mixed;
minimum-links number;
}
atm-options {
cell-bundle-size cells;
ilmi;
linear-red-profiles profile-name {
high-plp-max-threshold percent;
low-plp-max-threshold percent;
queue-depth cells high-plp-threshold percent low-plp-threshold percent;
}
mpls {
Chapter 1: Network Interfaces Configuration Statements and Hierarchy
[edit interfaces] Hierarchy Level
[edit interfaces interface-name
[edit
5