Network Interfaces Configuration Statements And Hierarchy; [Edit Chassis] Hierarchy Level; Chapter 1 Network Interfaces Configuration Statements And Hierarchy - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

Chapter 1
Network Interfaces Configuration
Statements and Hierarchy

[edit chassis] Hierarchy Level

This chapter shows the complete configuration statement hierarchy, listing all possible
configuration statements and showing their level in the configuration hierarchy.
When you are configuring the JUNOS Software, your current hierarchy level is shown
in the banner on the line preceding the user@host# prompt.
This section contains the following topics:
[edit chassis] Hierarchy Level on page 3
[edit interfaces] Hierarchy Level on page 4
[edit logical-systems] Hierarchy Level on page 20
[edit protocols connections] Hierarchy Level on page 24
[edit protocols dot1x] Hierarchy Level on page 25
[edit protocols iccp] Hierarchy Level on page 25
[edit protocols lacp] Hierarchy Level on page 25
[edit protocols oam] Hierarchy Level on page 25
[edit protocols ppp] Hierarchy Level on page 27
[edit protocols pppoe] Hierarchy Level on page 27
[edit protocols protection-group] Hierarchy Level on page 28
[edit protocols vrrp] Hierarchy Level on page 28
[edit system processes] Hierarchy Level on page 28
chassis {
aggregated-devices {
ethernet {
device-count number;
}
sonet {
device-count number;
}
}
channel-group number {
ethernet {
[edit chassis] Hierarchy Level
3