Table of Contents
Advertisement
www.ti.com
C2000Ware
contains a full suite of example software designed to work with the F280049 controlCARD.
This software package includes many example projects which allow the user to experiment with the ADC,
PWM, and other C2000 peripherals.
Support files for both register-level and driver-level programming are included with C2000Ware:
•
Register programming examples are located at:
\ti\c2000\C2000Ware_XXXX\device_support\f28004x\examples
•
Driverlib programming examples are located at:
\ti\c2000\C2000Ware_XXXX\driverlib\f28004x\examples
4
Special Notes
4.1
XDS100v2 Emulator and SCI/UART Connectivity
The F280049 controlCARD provides on-board emulation and USB-to-UART adapter functionality. This
allows for a convenient method to debug and demo the F280049 MCU.
The FTDI chip, its support circuitry, and associated isolation components are placed in Macro A, the left
section of the controlCARD. Each of these components contains an additional A within the component
reference designator (that is R2:A for resistor 2 in Macro A).
Each F280049 controlCARD's XDS100v2 is programmed with a fixed serial number. If a debug session
must involve two or more F280049 controlCARDs, each controlCARDs must have a unique serial number,
and some must be reprogrammed. See:
http://processors.wiki.ti.com/index.php/XDS100#Q:_Can_I_change_the_serial_number_on_my_XDS100v2
.3F.
The configuration of the switches on S1:A (shown in
active, whether an external emulator can be used, or whether the device will boot from
FLASH/peripherals.
SPRUIC4C – July 2017 – Revised January 2019
Submit Documentation Feedback
Figure
Copyright © 2017–2019, Texas Instruments Incorporated
2) determine whether the onboard emulator is
Piccolo F280049 controlCARD Information Guide
Special Notes
5
Advertisement
Table of Contents
