4.5
Trap Instruction
Trap instruction exception handling starts when a TRAPA instruction is executed. Trap instruction
exception handling can be executed at all times in the program execution state.
The TRAPA instruction fetches a start address from a vector table entry corresponding to a vector
number from 0 to 3, as specified in the instruction code.
Table 4-5 shows the status of CCR and EXR after execution of trap instruction exception
handling.
Table 4-5
Status of CCR and EXR after Trap Instruction Exception Handling
Interrupt Control Mode
0
2
Legend
1: Set to 1
0: Cleared to 0
—: Retains value prior to execution
118
CCR
I
UI
1
—
1
—
EXR
I2 to I0
T
—
—
—
0