Module Stop Control Register A (Mstpcra) - Renesas H8S/2633 Series Hardware Manual

19.2.4

Module Stop Control Register A (MSTPCRA)

Bit : 7
MSTPA7
Initial value : 0
R/W : R/W
MSTPCR is a 8-bit readable/writable register that performs module stop mode control.
When the MSTPA1 bit in MSTPCR is set to 1, A/D converter operation stops at the end of the bus
cycle and a transition is made to module stop mode. Registers cannot be read or written to in
module stop mode. For details, see section 24.5, Module Stop Mode.
MSTPCRA is initialized to H'3F by a reset and in hardware standby mode. It is not initialized by a
manual reset and in software standby mode.
Bit 1—Module Stop (MSTPA1): Specifies the A/D converter module stop mode.
Bit 1
MSTPA1 Description
0 A/D converter module stop mode cleared
1 A/D converter module stop mode set
868
6 5
MSTPA6 MSTPA5 MSTPA4
0 1
R/W R/W
4 3 2
MSTPA3 MSTPA2
1 1 1
R/W R/W R/W
1 0
MSTPA1 MSTPA0
1 1
R/W R/W
(Initial value)