Interrupts; Interrupt Sources And Priorities - Renesas H8S/2633 Series Hardware Manual

Hide thumbs Also See for H8S/2633 Series:

Table of Contents

Interrupts

There are three kinds of TPU interrupt source: TGR input capture/compare match, TCNT

overflow, and TCNT underflow. Each interrupt source has its own status flag and enable/disabled

bit, allowing generation of interrupt request signals to be enabled or disabled individually.

When an interrupt request is generated, the corresponding status flag in TSR is set to 1. If the

corresponding enable/disable bit in TIER is set to 1 at this time, an interrupt is requested. The

interrupt request is cleared by clearing the status flag to 0.

Relative channel priorities can be changed by the interrupt controller, but the priority order within

a channel is fixed. For details, see section 5, Interrupt Controller.

Table 11-13 lists the TPU interrupt sources.