Renesas H8S/2633 Series Hardware Manual page 445

Port 7 Data Register (P7DR)
Bit : 7
P77DR
Initial value : 0
R/W : R/W
P7DR is an 8-bit readable/writable register, which stores the output data of port 7 pins (P77 to
P70).
P7DR is initialized to H'00 by a power-on reset and in hardware standby mode. The previous state
is maintained by a manual reset and in software standby mode.
Port 7 Register (PORT7)
Bit : 7
P77
Initial value : —*
R/W : R
Note: * Determined by the state of pins P77 to P70.
PORT7 is an 8-bit read-dedicated register, which reflects the state of pins. Write is disenabled.
Always carry out writing off output data of port 7 pins (P77 to P70) to P7DR without fail.
When P7DDR is set to 1, if port 7 is read, the values of P7DR are read. When P7DDR is cleared to
0, if port 7 is read, the states of pins are read out.
P7DDR and P7DR are initialized by a power-on reset and in hardware standby mode, so PORT7 is
determined by the state of the pins. The previous state is maintained by a manual reset and in
software standby mode.
6 5
P76DR P75DR P74DR
0 0
R/W R/W
6 5
P76 P75
—* —*
R R
4 3
P73DR P72DR
0 0
R/W R/W R/W
4 3
P74 P73 P72
—* —*
R R
2 1
P71DR P70DR
0 0
R/W R/W
2 1
P71 P70
—* —* —*
R R
0
0
0
R
391