Register Descriptions (2) (Full Address Mode); Memory Address Register (Mar); I/O Address Register (Ioar) - Renesas H8S/2633 Series Hardware Manual

Bit 0
DTIE0A Description
0 Transfer end interrupt disabled
1 Transfer end interrupt enabled
8.3

Register Descriptions (2) (Full Address Mode)

Full address mode transfer is performed with channels A and B together. For details of full address
mode setting, see table 8-4.
8.3.1

Memory Address Register (MAR)

Bit : 31
MAR : —
Initial value : 0
R/W : —
Bit : 15
MAR :
Initial value : *
R/W : R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MAR is a 32-bit readable/writable register; MARA functions as the transfer source address
register, and MARB as the destination address register.
MAR is composed of two 16-bit registers, MARH and MARL. The upper 8 bits of MARH are
reserved: they are always read as 0, and cannot be modified.
MAR is incremented or decremented each time a byte or word transfer is executed, so that the
source or destination memory address can be updated automatically. For details, see section 8.3.4,
DMA Control Register (DMACR).
MAR is not initialized by a reset or in standby mode.
8.3.2

I/O Address Register (IOAR)

IOAR is not used in full address transfer.
30 29 28 27 26
— — — — —
0 0 0 0
— — — — —
14 13 12 11 10
* * * *
25 24 23 22
— —
0 0 0
* *
— — R/W R/W R/W R/W R/W R/W R/W R/W
9 8 7 6
* * * * *
(Initial value)
21 20 19 18 17
* * * *
5 4 3 2
* * * *
*: Undefined
16
* *
1 0
* *
259