Eot Sensor Replacement - Honda MUV700 big red Service Manual

DRIVETRAIN SYSTEM
Con nect the gear position switch 3P black connec-
tor.
Install the following:
- engine front cover (page 3·6)
- mudgua rd (page 3-12)
EOT SENSOR
REPLACEMENT
14-58
Drain the engine oil (page 4-13)
Remove the maintenance lid (page 3 -16),
Disconnect the 2P black connector from the EDT
sensor.
Remove the EDT sensor and seali ng washer.
Install a new EOT sensor with a new sealing washer
and tighten it.
TORQUE: 12 N-m 11.2 kgf·m , 9 Ibf.ft)
Connect the 2P black connector to the EDT sensor.
Install the mai ntenance lid (page 3- 16).
Fill the engine with recommended oil (page 4- 13).
3P BLACK CON N ECTOR