Invalid User Job Type Fail Rap - Xerox VersaLink B7025 Service Manual

117-344 Invalid User Job Type Fail RAP

117-344 The applicable user job cannot be executed at the system level.
Procedure
Advise the customer to check if public print it is set to be stored as charge print.
Status Indicator RAPs
117-344, 117-345
117-345 SSMM Batch Setting Duration Fail RAP
117-345 During the batch setting of LoDeM, a reboot occurred due to a change in system data.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
1. For a single occurrence, take no action.
2. If the fault persists, perform the steps that follow:
a. Switch off, then switch on the machine,
b. Ensure that all connectors on the drive PWB,
3.10 Item 6 are securely connected. Ensure all surface mounted modules on both
PWBs are securely connected.
c. Reload the software, GP
d. Perform the OF2 Special Boot Modes RAP.
April 2017
2-540 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
PL 1.10 Item 3 and the ESS PWB,
4.
PL
Launch Issue