Xerox VersaLink B7025 Service Manual page 686

14. Remove the front bearing, Figure 8:
a. Remove the KL-clip (1).
b. Remove the bearing (2).
Figure 8 Bearing removal
15. Remove the rear bearing, then the DADF takeaway roll,
a. Remove the E-clip (1).
b. Remove the bearing (2).
c. Remove the DADF takeaway roll (3).
Figure 9 Takeaway roll removal
Repairs and Adjustments
REP 5.17
Replacement
1.
2.
Figure 9:
April 2017
4-46
The replacement is the reverse of the removal procedure.
Install the front bracket and ground roll plate as shown in
Figure 10 Ground plate installation
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 10.
Inside
Outside
Launch Issue