Xerox VersaLink B7025 Service Manual page 824

5. Remove the tray 3 feeder assembly,
a. Disconnect two connectors (1).
b. Remove two screws (2).
c. Remove the tray 3 feeder assembly (3).
Figure 2 Tray 3 feeder assembly removal
Repairs and Adjustments
REP 80.8
Figure 2: 6. Remove the FDR 2T cover from the tray 3 feeder assembly,
a. Remove the screw (1).
b. Remove the FDR 2T cover (2). Retain the cover for installation onto the new tray 3
feeder assembly.
Figure 3 FDR 2T cover removal
Replacement
Ensure that the FDR 2T cover is installed onto the new tray 3 feeder assembly. Refer to
3.
1. The replacement is the reverse of the removal procedure.
2. If new tray 3 feeder assembly is installed, enter
counter 954-802.
April 2017
4-184 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 3.
CAUTION
dC135 HFSI Counter. Reset the HFSI
Launch Issue
Figure