10. Unhook (1), then remove the actuator (2),
Figure 6 Actuator removal
11. Prepare to remove the stacker shaft assembly,
a.
Remove the E-clip (1).
b.
Move the bearing (2) in the direction of the arrow.
Figure 7 Preparation
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure
6.
Figure
7:
12. Remove the stacker shaft assembly in the direction of the arrow,
Figure 8 Stacker shaft assembly removal
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-77
Figure
8.
Repairs and Adjustments
REP 12.16