Controller Ui Fail Rap - Xerox VersaLink B7025 Service Manual

016-360, 016-362 Controller UI Fail RAP

016-360 Cont UI diagnostic fail 1.
016-362 Cont UI diagnostic fail 2.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Check the wiring between the ESS PWB and the UI
3. Install new components as necessary:
• ESS PWB, PL 3.10 Item 6.
• UI assembly, PL 2.05 Item 7.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10.
016-363 Controller LyraCard Fail RAP
016-363 Cont JPEG card diagnosed as having a failure.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Ensure that all connectors on the ESS PWB,
Ensure all surface mounted modules are securely connected.
3. Reload the software, GP 4.
4. If the fault persists, install a new ESS PWB,
April 2017
2-123
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
PL 3.10 Item 6 are securely connected.
PL 3.10 Item 6.
Status Indicator RAPs
016-360, 016-362, 016-363