Job Type; Delay Print - Xerox ColorQube 8700 Reference Manual

Job Type

The Job Type command indicates a job that requires special handling.
PJL COMMENT Command
@PJL COMMENT OID_ATT_JOB_TYPE
OID_VAL_JOB_TYPE_string;
Where string is one of the following:
PRINT
PROOF_PRINT
FAX_SEND

Delay Print

Delays printing a job until the time specified by the command.
PJL COMMENT Command
@PJL COMMENT OID_ATT_JOB_PRINT_AFTER
"yyyymmddhhmmss";
Where yyyy=year, mm=month, dd=day, hh=hours, mm=minutes, ss=seconds (always 00)
The default delay time is midnight, 00:00:00
CQ8700-8900
Customer Support
Indicates a normal print job.
Comparable to Sample Set in a driver. This job type allows you to specify multiple copies
with the @PJL SET COPIES command. One set prints for review. Then you can release
or delete the job.
This job type directs a print job to use the embedded fax board and fax the job to a phone
number instead of printing the job. See the FAX SEND command for the commands to
provide the phone number and other fax options.
DSC Comment Command
%%OID_ATT_JOB_TYPE
OID_VAL_JOB_TYPE_string;
DSC Comment Command
%%OID_ATT_JOB_PRINT_AFTER
"yyyymmddhhmmss";
Page 6