Rep 13.20 Stacker Tray; Rep 13.21 Eject Belt - Xerox VersaLink B7025 Service Manual

REP 13.20 Stacker Tray

Parts List on PL 13.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. If installed, remove the booklet maker assembly,
2. Remove the front cover assembly,
3. Remove the rear upper cover, REP
4. Remove the stacker tray, Figure 1:
a. Remove four screws (1).
b. Remove the stacker tray (2).
Figure 1 Stacker tray removal
Replacement
The replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 13.20, REP 13.21
WARNING
GP 10. Disconnect the power cord
REP 13.31.
REP 13.6.
13.7.

REP 13.21 Eject Belt

Parts List on PL 13.29
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Undock the finisher, REP 13.5.
2. Remove the booklet maker,
3. Remove the rear upper cover,
4. Remove the eject motor, REP
5. Remove the eject belt, PL 13.29 Item
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-118 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
REP 13.31.
REP 13.7.
13.25.
10.
Launch Issue