Rep 70.10 Ttm Tray 4 Lift Shaft And Brake - Xerox VersaLink B7025 Service Manual

REP 70.10 TTM Tray 4 Lift Shaft and Brake

Parts List on PL 70.67
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Ensure the tray 4 transport assembly, PL 80.70 Item 11
1. Fully pull out tray 4. Remove the paper from tray 4. Lift out tray 4.
2. Remove the tray 4 transport assembly,
3. Remove the tray 4 front cover, PL 70.65 Item
4. Turn tray 4 upside down.
5. Release the front lift cables, Figure
a. Remove the E-clip (1).
b. Release the front lift cables (2).
Figure 1 Front cables
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
CAUTION
is supported when removing tray 4.
PL 80.70 Item 11.
3.
1:
6. Release the rear lift cables,
a. Pull the spring away from the pulley, then remove the E-clip (1).
b. Release the rear lift cables (2).
7. Remove the E-clip (1), Figure
April 2017
4-173
Figure 2:
Figure 2 Rear cables
3:
Figure 3 Rear E-clip
Repairs and Adjustments
REP 70.10