Wlan Module Connection Failure Rap - Xerox VersaLink B7025 Service Manual

018-428 WLAN Module Connection Failure RAP

018-428 There is a connection failure between the WIFI module and the ESS PWBA.
Procedure
Perform the steps that follow:
1. Switch off the machine, GP 10. Remove, then install the WIFI module. Switch on the
machine, GP 10.
2. If the fault persists, install new components as necessary:
• WiFi dongle, PL 3.10 Item 10.
• ESS PWB, PL 3.10 Item 6.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
018-429 to 018-436 Duplicate IP Address IPv4 (WiFi) RAP
018-429 There is an IP address conflict with another system on the network (WIFI).
018-430 There is an IP address conflict with another system on the network (WIFI direct).
018-431 There is an IP address conflict with another system on the network (WIFI).
018-432 There is an IP address conflict with another system on the network (WIFI).
018-433 There is an IP address conflict with another system on the network (WIFI).
018-434 There is an IP address conflict with another system on the network (WIFI).
018-435 There is an IP address conflict with another system on the network (WIFI).
018-436 There is an IP address conflict with another system on the network (WIFI).
Procedure
Advise the customer to request their network administrator to change the IP address of the
systems the machine is connected to, to something different.
April 2017
2-245
Status Indicator RAPs
018-428, 018-429 to 018-436