Xerox VersaLink B7025 Service Manual page 806

5. When both cables are slack, disengage the lift shaft (1) from the frame. Then slide the
tray cable pulley (2) to the front of the lift shaft to release the rear lift cable ends (3) that
are trapped in the pocket underneath the tray cable pulley,
Figure 4 Releasing the cable ends
Repairs and Adjustments
REP 70.5
6.
Figure 4.
April 2017
4-166
Remove the rear tray cables, Figure 5:
a. Remove the E-ring, wire guide and pulley (1).
b. Remove the cables (2).
Figure 5 Rear cables removal
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue