Rep 12.17 Stacker Motor - Xerox VersaLink B7025 Service Manual

REP 12.17 Stacker Motor

Parts List on PL 12.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the integrated office finisher,
2. Remove the rear cover, PL 12.05 Item
3. Turn over the integrated office finisher.
4. Remove the tray cover, PL 12.06 Item
5. Disconnect the connector, Figure 1:
a. Release the harness from the three clamps (1).
b. Release the harness from the retainer (2).
c. Disconnect the connector (3).
Figure 1 Connector
Repairs and Adjustments
REP 12.17
WARNING
GP 10. Disconnect the power cord
REP 12.1.
14.
3.
6. Remove the bracket, Figure
a. Remove the screw (1).
b. Remove the bracket (2).
7. Remove the stacker motor assembly,
a. Remove two screws (1).
b. Remove the stacker motor assembly (2).
Figure 3 Stacker motor assembly removal
April 2017
4-78 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
2:
Figure 2 Bracket removal
Figure 3:
Launch Issue