Replacement
1.
Insert the hole punch assembly rear locating pin into the H-transport frame.
2.
The replacement is the reverse of the removal procedure.
3.
Perform
ADJ 13.1
Finisher LX Hole Punch Position.
Repairs and Adjustments
REP 13.2, REP 13.3
REP 13.3 H-Transport Belt
Parts List on
PL 13.08
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Remove the H-transport assembly,
2.
Remove the H-transport rear cover,
3.
Remove the H-transport belt,
a.
Loosen two screws to release the belt tension (1).
b.
Remove the belt (2).
Figure 1 H-transport belt removal
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-96
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP
10. Disconnect the power cord
REP
13.1.
PL 13.06 Item
9.
Figure
1:
Launch Issue