Controller Usb 2.0 Fail Rap - Xerox VersaLink B7025 Service Manual

016-364, 016-365 Controller USB 2.0 Fail RAP

016-364 Cont USB 2.0 host diagnostic fail.
016-365 Cont USB 2.0 device diagnostic fail.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Ensure that all connectors on the ESS PWB,
Ensure all surface mounted modules are securely connected.
3. Reload the software, GP 4.
4. If the fault persists, install a new ESS PWB,
Status Indicator RAPs
016-364, 016-365, 016-366, 016-367
WARNING
GP 10.
PL 3.10 Item 6 are securely connected.
PL 3.10 Item 6.
016-366, 016-367 Controller HDD Fail RAP
BSD-ON: BSD 3.9 ESS
016-366 Cont HDD diagnostic fail 1.
016-367 Cont HDD diagnostic fail 2.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Check the wiring between the ESS PWB,
3. Reload the software, GP 4.
4. Install new components as necessary:
• ESS PWB,PL 3.10 Item
• HDD, PL 3.10 Item 2.
April 2017
2-124 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
PL 3.10 Item 6 and the hard disk.
6.
Launch Issue