Xerox VersaLink B7025 Service Manual page 708

4. Remove the gear pulley, Figure 2:
a. Remove the E-clip (1).
b. Remove the gear (2).
c. Remove the flange (3).
Figure 2 Gear pulley removal
5. Remove the bearing, Figure 3.
Figure 3 Bearing removal
Repairs and Adjustments
REP 12.10
6. Remove the support bearing from the entrance lower chute assembly,
a. Remove the self-tapping screw (1).
b. Remove the support bearing (2).
Figure 4 Support bearing removal
7. Remove the main paddle shaft assembly,
Figure 5 Main paddle shaft assembly removal
April 2017
4-68 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 4:
Figure 5.
Launch Issue