Gp 18 Environmental Data - Xerox VersaLink B7025 Service Manual

Table 4 IOT states
Sub-System Run Mode Ready Mode
Fusing Fan Temperature Temperature
controlled slow control in
or fast rotation stop or rotate
(slow)
Marking Fan Temperature Temperature
controlled, control led
either stopped either stop or
or slow or fast slow rotation
rotation
ESS (Refer- Operating state Standby
ence only)
General Procedures and Information
GP 17, GP 18
Low Power Sub Power
Mode Sleep Mode Off Mode
Temperature Off Off
control in stop
or rotate (slow)
Temperature Off Off
control led
either stop or
slow rotation
Standby Ready to Inactive
receive

GP 18 Environmental Data

Operating
• Temperature range: 10 to 32 degrees C (50 to 90 degrees F).
• Relative humidity: 15 to 85%.
• Altitude: 0 to 2500 metres (0 to 8200 feet).
• Noise:
NOTE: Blue Angel Europe criteria measured in accordance with RAL-UZ 122.
– Table 1 contains the maximum value in decibels of noise that can be generated by
the basic machine.
– Table 2 contains the maximum value in decibels of noise that can be generated by
the machine in other configurations.
Table 1 Maximum noise limits, basic machine
PPM Standby (dBA) Run Continuous (dBA) Run Impulse (dBA)
45 35 56
55 35 56
Table 2 Maximum noise limits, all configurations
PPM Standby (dBA) Run continuous (dBA) Run Impulse (dBA)
45 35 59
55 35 59
Storage
• Altitude: 0 to 3100 metres (0 to 10170 feet).
• Maximum temperature 48 degrees C (118 degrees F).
April 2017
6-22 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
59
61
63
63
Launch Issue