Rep 80.29 Tray 4 Lower Feed Chute (Ttm); Rep 80.30 Ttm Chute - Xerox VersaLink B7025 Service Manual

REP 80.29 Tray 4 Lower Feed Chute (TTM)

Parts List on PL 80.70
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the tray 4 feeder assembly,
2. Turn the tray 4 feeder assembly upside down.
3. Remove the lower feed chute, Figure
a. Remove two screws (1).
b. Remove the lower feed chute (2).
Figure 1 Lower feed chute removal
Replacement
The replacement is the reverse of the removal procedure.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
REP 80.35.
1:

REP 80.30 TTM Chute

Parts List on PL 80.65
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the lower (tray 3 and 4) takeaway roll,
2. Remove the TTM chute, Figure
a. Remove two screws (1).
b. Move the TTM chute (2) towards the rear, then remove the TTM chute.
NOTE: The TTM chute is secured in the centre by a clip feature.
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-205
WARNING
GP 10. Disconnect the power cord
REP 80.41.
1:
Figure 1 TTM chute removal
Repairs and Adjustments
REP 80.29, REP 80.30