11. Disconnect the connectors,
Figure
a.
Disconnect the three connectors (1), then release the associated harness clamps.
b.
Pull the harness through the hole in the chassis (2).
Figure 8 Connectors
Repairs and Adjustments
REP 3.2
8:
Take not to damage or dislodge the rear cover ground clip (3) when removing the ESS upper
panel.
12. Remove the ESS upper panel,
a.
Remove both screws (1).
b.
Remove the ESS upper panel (2).
c.
Release all remaining harness clamps from the ESS upper panel.
Figure 9 ESS upper panel removal
April 2017
4-20
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
CAUTION
Figure
9:
Launch Issue