Controller Parallel Card Fail Rap - Xerox VersaLink B7025 Service Manual

016-358 Controller Parallel Card Fail RAP

016-358 Controller parallel port diagnostic fail.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Reload the software, GP 4.
3. If the fault persists, install a new ESS PWB,
Status Indicator RAPs
016-358, 016-359, 016-361
WARNING
GP 10.
PL 3.10 Item 6.
016-359, 016-361 Controller USB Fail RAP
016-359 Cont USB HUB diagnostic fail.
016-361 Cont USB 3.0 device diagnostic fail.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Install a new ESS PWB, PL 3.10 Item
April 2017
2-122 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
6.
Launch Issue