Adj 5.2 Dadf Side Edge Registration - Xerox VersaLink B7025 Service Manual

Figure 3 Direction B
3. Reinstall the DADF rear cover.
4. After adjustment, perform ADJ 5.2
Lead Edge Registration.
Repairs and Adjustments
ADJ 5.1, ADJ 5.2
DADF Side Edge Registration and ADJ 5.3

ADJ 5.2 DADF Side Edge Registration

Purpose
To correct DADF side edge registration.
Initial Actions
NOTE: For a description of the print/copy orientation definitions, refer to
entation Definitions.
Before performing this procedure, perform the procedures that follow:
1. dC126 System Registration.
2. ADJ 60.3 IIT Side Edge Registration.
3. ADJ 5.1 DADF Lead Edge Skew.
Side 1 Check
1. Place the test pattern 82E2010 (A4) or 82E2020 (8.5 x11inch) face up in the DADF input
tray. Ensure that the document guides are correctly adjusted.
2. Make a simplex copy.
3. Figure 1, use the grids A to measure the side edge displacement. Check that the side
edge registration error is within +/- 2.1 mm (0.082 inch).
DADF
April 2017
4-226 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
GP 31 Print/Copy Ori-
Launch Issue