Rom Write Error (During Dld Method) Rap - Xerox VersaLink B7025 Service Manual

016-500, 016-501 ROM Write Error (During DLD Method)
RAP
016-500 An error has occurred during the process of writing data to the cont-ROM.
016-501 An error has occurred during the process of writing data to the S2X-ROM.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Reload the software, GP 4.
2. If the fault persists, install a new ESS PWB,
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
PL 3.10 Item 6.
016-502 ROM Write Error (During PJL Method) RAP
016-502 An error was detected when writing data to one of the ROMs in the machine.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Ensure that all connectors on the ESS PWB,
Ensure all surface mounted modules are securely connected.
2. Reload the software, GP 4.
3. If the fault persists, install a new ESS PWB,
April 2017
2-135
WARNING
GP 10. Disconnect the power cord. Electricity can cause
PL 3.10 Item 6 are securely connected.
PL 3.10 Item 6.
Status Indicator RAPs
016-500, 016-501, 016-502