Xerox VersaLink B7025 Service Manual page 650

3. Prepare to remove the LVPS assembly,
a. Disconnect eight connectors (1).
b. Release the harness from the clamp (2).
c. Remove both harness clamps (3) from the frame.
Figure 2 Preparation
4. Remove four screws (1), then the LVPS assembly (2),
Figure 3 LVPS removal
Repairs and Adjustments
REP 1.4
Figure 2:
Figure 3.
Replacement
1. The replacement is the reverse of the removal procedure.
2. Ensure the smaller 2 pin connector is connected to PJ3, not PJ4.
April 2017
4-10 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue