5.
Remove the tray 4 feeder assembly,
a.
Remove the screw (1).
b.
Remove the tray 4 feeder assembly (2).
Figure 3 Tray 4 feeder assembly removal
Replacement
1.
The replacement is the reverse of the removal procedure.
2.
If new tray 4 feeder assembly is installed, enter
counter 954-803.
Repairs and Adjustments
REP 80.35, REP 80.36
Figure
3:
dC135
HFSI Counter. Reset the HFSI
REP 80.36 Tray 2 Feed Out Sensor (TTM)
Parts List on
PL 80.65
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Remove the upper (tray 2) takeaway roll,
2.
Remove two screws (1),
Figure
April 2017
4-212
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP
10. Disconnect the power cord
REP
80.41.
1.
Figure 1 Screw removal
Launch Issue