Rep 60.4 Lamp Assembly - Xerox VersaLink B7025 Service Manual

REP 60.4 Lamp Assembly

Parts List on PL 60.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Do not touch the chip on the lamp assembly.
1. Open the DADF.
2. Remove the document glass, REP 60.1
3. Move the full rate carriage to the cutouts in the frame.
4. Disconnect the FFC LED cable assembly,
a. Move the connector housing catch (2) in the direction of the arrows.
b. Disconnect the FFC LED cable assembly.
Figure 1 FFC LED cable assembly
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
CAUTION
Figure 1:
5. Remove the LED bracket, Figure
a. Remove three screws (1).
b. Remove the LED bracket (2).
Figure 2 LED bracket removal
6. Remove the lamp assembly,
a. Remove two screws (1).
b. Remove the lamp assembly (2).
Figure 3 Lamp assembly removal
April 2017
4-149
2:
Figure 3:
Repairs and Adjustments
REP 60.4