Abl Version Fail Rap - Xerox VersaLink B7025 Service Manual

116-381 ABL Version Fail RAP

116-381 ABL did not match the ABL version information on the NVM, or corrupted data was
detected.
Procedure
Initialize the NVM, refer to dC301 NVM Initialization.
NOTE: Inform the customer that this will clear all address information.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
116-382 ABL Initialize Fail RAP
116-382 ABL has failed to access the NVM or HDD.
Procedure
Perform the steps that follow:
1. Enter dC131. Set NVM value 790-664 to 0.
2. Reload the software, GP 4.
3. If the fault persists, perform the
April 2017
2-513
016-210, 506, 777, 780, 798 HDD Error RAP.
Status Indicator RAPs
116-381, 116-382