To 016-724 Settings Error Rap - Xerox VersaLink B7025 Service Manual

016-721 to 016-724 Settings Error RAP

016-721 Paper types cannot be determined because all the settings for custom paper priority
are set to disabled.
016-722 Staple position that is not supported by this machine or a paper size that is not sup-
ported by the Finisher was specified.
016-723 Punch position that is not supported by this machine or the paper size that is not sup-
ported by the Finisher was specified.
016-724 Job canceled due to invalid combination of staple and punch positions.
Procedure
Perform the steps that follow:
1. Advise the customer to correct the settings, then execute the command again.
2. If the fault persists, reload the software,
Status Indicator RAPs
016-721 to 016-724, 016-725
GP 4.
016-725 B-Formatter Library Image Conversion Error RAP
016-725 An error has occurred in the B-Formatter during the image conversion of scanned
document to fax sending document.
Procedure
Perform the steps that follow:
1. Advise the customer to directly scan the document and send it to the fax recipient.
2. If the fault persists, reload the software,
April 2017
2-184 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
GP 4.
Launch Issue