7.
Remove the bottom plate,
Figure
2:
a.
Release the harness from the 5 clamps (1).
b.
Disconnect eight connectors (2).
c.
Remove the harness from the retainers (3).
d.
Remove four screws (4).
e.
Remove the bottom plate (5).
Figure 2 Bottom plate removal
Repairs and Adjustments
REP 12.27
8.
Remove the eject home sensor,
a.
Release the harness from the clamp (1).
b.
Disconnect the connector (2).
c.
Remove the eject home sensor (3) from the bracket.
Figure 3 Eject home sensor removal
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-92
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure
3:
Launch Issue