Rep 80.42 Ttm Pwb - Xerox VersaLink B7025 Service Manual

REP 80.42 TTM PWB

Parts List on PL 70.90
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
Observe ESD procedures during this procedure.
1. Remove the TTM rear cover, PL 70.95 Item
2. Remove the TTM PWB, Figure 2:
a. Disconnect seven connectors.
b. Remove six screws.
c. Remove the TTM PWB (1).
Repairs and Adjustments
REP 80.42
WARNING
GP 10. Disconnect the power cord
CAUTION
8.
Replacement
1. The replacement is the reverse of the removal procedure.
2. If a new TTM PWB is installed, change the value of NVM ID 742-205 to 2.
April 2017
4-218 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 2 TTM PWB removal
Launch Issue