Machine Code Check Fail Rap - Xerox VersaLink B7025 Service Manual

116-392 Machine Code Check Fail RAP

116-392 Machine code check fail.
Procedure
For information only. No service action necessary.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
116-396 FIPS140 Self Test Fail RAP
116-396 At start, the FIPS140 encryption module self-test has detected a failure. Self test error
due to illegal ROM (FW).
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Reload the software, GP 4.
April 2017
2-517
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
Status Indicator RAPs
116-392, 116-396