Image Log No Send Rule Rap - Xerox VersaLink B7025 Service Manual

016-509, 016-510 Image Log No Send Rule RAP

016-509 Because rules for log image transfer are not registered, a job cannot be continued.
016-510 Rules for log image transfer are not registered.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Advise the customer to register rules for transfer from the destination image log control
server to the device.
2. Check the wiring between the ESS PWB,
3. Initialise the hard disk. Refer to dC355
4. Install a new hard disk, PL 3.10 Item
Status Indicator RAPs
016-509, 016-510, 016-511, 016-512
WARNING
PL 3.10 Item 6 and the hard disk.
Hard Disk Diagnostics.
2.
016-511, 016-512 Image Log Invalid Send Rule RAP
016-511 Rules for log image transfer are illegal, causing a job to be discontinued.
016-512 Rules for log image transfer are illegal.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Advise the customer to overwrite rules for transfer from the destination image log control
server to the device.
2. Check the wiring between the ESS PWB,
3. Initialise the hard disk. Refer to
4. Install a new hard disk, PL 3.10 Item
April 2017
2-138 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
PL 3.10 Item 6 and the hard disk.
dC355 Hard Disk Diagnostics.
2.
Launch Issue