Xerox VersaLink B7025 Service Manual page 799

11. Remove the harness assembly, Figure
a. Pull the FFC cable (1) toward the inside of the machine.
b. Disengage the hooks (2) on the foot, then remove the harness assembly (3).
Figure 9 Assembly removal
12. Remove the FFC cable, Figure 10:
a. Remove the FFC conductor (1).
b. Remove the FFC cable (2).
Figure 10 FFC cable removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
9: Replacement
1. The replacement is the reverse of the removal procedure.
2. Connect the FFC cable as shown in
a. Push section A of the spring and hook it to the tab (1) of the guide.
b. Push section B of the spring and hook it to the tab (2) of the guide.
April 2017
4-159
Figure 11.
Figure 11 Cable replacement
Repairs and Adjustments
REP 60.9