Rep 80.40 Transfer Gear (Ttm); Rep 80.41 Ttm Takeaway Rolls And Bearings - Xerox VersaLink B7025 Service Manual

Hide thumbs Also See for VersaLink B7025:
Table of Contents

Advertisement

REP 80.40 Transfer Gear (TTM)

Parts List on
PL 70.85
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Pull out tray 3. Remove the paper.
2.
Remove the bracket assembly,
PL 70.85 Item
3.
Remove the transfer gear,
PL 70.85 Item 8
Replacement
The replacement is the reverse of the removal procedure.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP
10. Disconnect the power cord
9.
from the bracket.

REP 80.41 TTM Takeaway Rolls and Bearings

Parts List on
PL 80.65
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Perform the relevant procedure:
Upper (Tray 2) Takeaway Roll
Lower (Tray 3 and 4) Takeaway Roll
Upper (Tray 2) Takeaway Roll
1.
Pull out trays 2, 3 and 4. Remove the paper.
2.
Remove trays 2, 3 and 4.
3.
Remove the tray 2 feeder assembly,
4.
Remove the rear cover,
PL 70.95 Item
5.
Remove the takeaway motor assembly,
6.
Remove two rear screws (1),
Figure 1 Rear screw removal
April 2017
4-215
WARNING
GP
10. Disconnect the power cord
REP
80.33.
8.
PL 70.85 Item
1.
Figure
1.
Repairs and Adjustments
REP 80.40, REP 80.41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versalink b7030Versalink b7035

Table of Contents